Applications

Professional Strength Iron Contaminate and Fallout Remover

Iron Contaminate and Fallout Remover is carefully formulated to offer you the safest and most effective method of removing potentially damaging fallout commonly found on your vehicles paintwork and rims.

• Targets and rapidly dissolves metal based fallout on paintwork, plastics and glass.
• Easy application simple to use.
• Ready to Use Formulation or diluted for Economy strength (use neat or 1:3).
• Suitable for Paintwork, Wheels and Trims.
• DO NOT Apply in Direct Sunlight or Extreme Temperatures.

Apply by spray, mop, sponge or brush. Allow to dwell for 3-5 minutes. DO NOT ALLOW TO DRY apply water mist if required. Agitate if necessary and rinse thoroughly with water.

Iron Contaminate and Fallout Remover is a professional strength product and it is therefore recommended that the product is suitably diluted before using. It can be diluted up to 1:3, however this would depend on the desired usage, application and also the degree of soiling.

Care should always be taken to select the correct dilution ratio for the desired use and application, and to avoid letting the product dry before rinsing, as permanent stains may appear on the treated surface. Extra care must be taken when used on plastic surfaces.

FOR PROFESSIONAL USE ONLY – This product should only be used in accordance with the manufacturer’s instructions.

General

Iron Contaminate and Fallout Remover is carefully formulated to offer you the safest and most effective method of removing potentially damaging fallout commonly found on your vehicles paintwork and rims. Its special blend of ingredients also aids in the cleaning of lime deposits and other dirt from paintwork.

Iron Contaminate and Fallout Remover;

• Targets metal based fallout on paintwork, plastics and glass.
• Rapidly dissolves metal based fallout
• Easy application and simple to use.
• Ready to Use Formulation or diluted for Economy strength (use neat or 1:3)
• Suitable for Paintwork
• Suitable for Wheels
• Suitable for Trims
• DO NOT Apply in Direct Sunlight or Extreme Temperatures.

Specification

Contains:

• Non-Ionic Surfactants: 5%
• Oxalic Acid Di-Hydrate: 5%
• Citric Acid Monohydrate: 5%

Hazards

Packing Group: 3

Hazard Phrases: Causes severe skin burns and eye damage.

Prec Phrases: Do not breathe dust/fume/gas/mist/vapours/spray. Wear protective gloves/protective clothing/eye protection/face protection. Store locked up.